H3C S1600V2-26P-HPWR L2 Ethernet Switch With 24*10/100BASE-T PoE+Ports And 2*100M/1G SFP Ports. (AC) (LS-1600V2-26P-HPWR-GL)
H3C S1600V2 Ethernet switch product is independently developed by New H3C Technologies Co., Ltd. (H3C). It is a web managed switch designed for network environments. It is easy to install, provides a rich set of features, and is widely used in small and medium-sized enterprises, commercial chains, CCTV,campuses, and other scenarios
H3C LS-1600V2-26P-HPWR-GL — Technical Specification
| Category | Specification |
|---|---|
| Model | LS-1600V2-26P-HPWR-GL |
| Series | H3C S1600V2 |
| Device Type | Layer 2 Cloud Managed Gigabit PoE+ Switch |
| Switching Layer | Layer 2 |
| Ethernet Ports | 24 × 10/100/1000BASE-T (PoE+) |
| Uplink Ports | 2 × 1000BASE-X SFP |
| Total Ports | 26 |
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| PoE Type | HPWR (High Power PoE+) |
| Total PoE Budget | 370W |
| Max Power per Port | Up to 30W |
| Switching Capacity | 52 Gbps |
| Forwarding Rate | 38.688 Mpps |
| MAC Address Table | 8K |
| VLAN Support | Up to 4094 VLANs |
| Spanning Tree | STP / RSTP |
| Link Aggregation | LACP supported |
| QoS | SP, WRR, SP+WRR |
| IGMP Snooping | Supported |
| DHCP Features | DHCP Snooping, Relay, Option 82 |
| Security Features | 802.1X, ACL, Port Security, IP Source Guard |
| Storm Control | Broadcast / multicast / unknown unicast suppression |
| Loop Protection | Supported |
| Management | Web GUI, CLI, SNMP, Cloud (H3C Cloudnet) |
| CPU | 800 MHz |
| Memory | 512 MB SDRAM / 256 MB Flash |
| Surge Protection | 6KV |
| Cooling | Fan-less (silent design) |
| Input Power | AC 100–240V, 50/60Hz |
| Max Power Consumption | ~11W base + up to ~439W with PoE load |
| Dimensions | 440 × 260 × 44 mm |
| Weight | ≤ 3.7 kg |
| Operating Temperature | -5°C to 50°C |
| Humidity | 5%–95% (non-condensing) |
| MTBF | ~80+ years class design |
Unique experiences to drive engagement
Users are looking to consume engaging content.
We empowers our teams to create the most relevant content.
We have one goal in mind, the user satisfaction.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.