H3C Layer 2 Switch 48x1GE PoE+ Ethernet Ports & 4x1GE/10GE SFP+ Ports (PoE Budget 370) (LS-1850V2-52X-PWR-GL)
H3C S1850V2-X series Ethernet switch is the layer 2 Gigabit access switch developed and designed by New H3C Technologies Co., Ltd. (H3C) especially for meeting high-performance network requirements. Based on the high-performance access, it offers abundant security access policies and enhanced network manageability and maintenance. This makes it ideal for diversified network building scenarios, including government, small and medium-sized enterprises, general and vocational education, security monitoring, and hotels.
H3C LS-1850V2-52X-PWR-GL Technical Specification
| Category | Specification |
|---|---|
| Model | LS-1850V2-52X-PWR-GL |
| Series | H3C S1850V2-X |
| Device Type | Layer 2 Managed Gigabit PoE+ Switch |
| Switching Layer | Layer 2 |
| Ethernet Ports | 48 × 10/100/1000BASE-T (PoE+) |
| Uplink Ports | 4 × 1G/10G SFP+ |
| PoE Standard | IEEE 802.3af / IEEE 802.3at |
| PoE Type | PWR (Standard PoE+) |
| Total PoE Budget | 370W |
| Max PoE per Port | Up to 30W |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.952 Mpps |
| MAC Address Table | 16K |
| VLAN Support | Up to 4094 VLANs |
| Spanning Tree | STP / RSTP / MSTP |
| Link Aggregation | LACP supported |
| QoS | SP, WRR, SP+WRR |
| IGMP Snooping | Supported |
| DHCP Features | DHCP Snooping, DHCP Relay, Option 82 |
| Security Features | 802.1X, ACL, Port Security, IP Source Guard |
| IPv6 Support | Yes |
| Stacking | IRF2 (stacking supported within series) |
| CPU | 800 MHz (1 Core) |
| Memory | 512 MB SDRAM / 256 MB Flash |
| Surge Protection | 6KV |
| Cooling | 3 Built-in Fans |
| Input Power | AC 100–240V, 50/60Hz |
| Power Consumption | ~36W (idle) / up to ~467W (full PoE load) |
| Dimensions | 440 × 400 × 43.6 mm |
| Weight | ≤ 6 kg |
| Operating Temperature | -5°C to 50°C |
| Humidity | 5%–95% (non-condensing) |
Unique experiences to drive engagement
Users are looking to consume engaging content.
We empowers our teams to create the most relevant content.
We have one goal in mind, the user satisfaction.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.