![LS-1600V2-26P-GL [(H3C S1600V2-26P L2 Ehernet Switch With 24*10/100/1000BASE-T Ports And 2*100M/1G SFP Ports, (AC))]](/web/image/product.product/695/image_1024/%5BC1-0335%5D%20LS-1600V2-26P-GL%20%5B%28H3C%20S1600V2-26P%20L2%20Ehernet%20Switch%20With%2024%2A10-100-1000BASE-T%20Ports%20And%202%2A100M-1G%20SFP%20Ports%2C%20%28AC%29%29%5D?unique=74212e1)
LS-1600V2-26P-GL [(H3C S1600V2-26P L2 Ehernet Switch With 24*10/100/1000BASE-T Ports And 2*100M/1G SFP Ports, (AC))]
H3C S1600V2 Ethernet switch product is independently developed by New H3C Technologies Co., Ltd. (H3C). It is a web managed switch designed for network environments. It is easy to install, provides a rich set of features, and is widely used in small and medium-sized enterprises, commercial chains, CCTV, campuses, and other scenarios.
H3C LS-1600V2-26P-GL — Technical Specification
| Category | Specification |
|---|---|
| Model | LS-1600V2-26P-GL |
| Series | H3C S1600V2 |
| Device Type | Layer 2 Cloud Smart Managed Gigabit Switch |
| Switching Layer | Layer 2 |
| Ethernet Ports | 24 × 10/100/1000BASE-T |
| Uplink Ports | 2 × 1000BASE-X SFP |
| Total Ports | 26 (24 RJ45 + 2 SFP) |
| PoE Support | ❌ Not supported |
| Switching Capacity | 52 Gbps |
| Forwarding Rate | 38.688 Mpps |
| MAC Address Table | 8K entries |
| VLAN Support | Up to 4094 VLANs |
| Spanning Tree | STP / RSTP |
| Link Aggregation | LACP supported |
| QoS | 8 queues (SP / WRR / SP+WRR) |
| Security Features | 802.1X, ACL, DHCP Snooping, Port Security |
| Storm Control | Broadcast / Multicast / Unknown Unicast suppression |
| Loop Protection | Supported |
| IGMP Snooping | Supported |
| Management | Web GUI, CLI, SNMP, Cloud management |
| CPU | 800 MHz |
| Memory | 512 MB SDRAM / 256 MB Flash |
| Surge Protection | 6KV |
| Fan Design | Fan-less |
| Input Power | AC 100–240V, 50/60Hz |
| Max Power Consumption | ~16W (non-PoE load) |
| Dimensions | 440 × 160 × 44 mm |
| Weight | ≤ 2.2 kg |
| Operating Temperature | -5°C to 50°C |
| Humidity | 5%–95% (non-condensing) |
| MTBF | ~84 years |
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
