LS-1850V2-52P-EI-GL (H3C Layer 2 Switch 48x1GE Ethernet Ports& 4x1GE SFP Ports )
H3C S1850V2-EI series Ethernet switch is the layer 2 Gigabit access switch with GE up-link ports, it is developed and designed by New H3C Technologies Co., Ltd. (H3C) especially for meeting high-performance network requirements. Based on the high-performance access, it offers abundant security access policies and enhanced network manageability and maintenance. This makes it ideal for diversified network building scenarios, including government, small and medium-sized enterprises, general and vocational education, security monitoring, and hotels.
H3C LS-1850V2-52P-EI-GL — Technical Specification
| Category | Specification |
|---|---|
| Model | LS-1850V2-52P-EI-GL |
| Series | H3C S1850V2-EI |
| Device Type | Layer 2 Managed Gigabit Switch |
| Switching Layer | Layer 2 |
| Ethernet Ports | 48 × 10/100/1000BASE-T |
| Uplink Ports | 4 × 1000BASE-X SFP |
| Console Port | 1 × RJ45 |
| PoE Support | ❌ Not supported |
| Switching Capacity | 104 Gbps |
| Forwarding Rate | 78 Mpps |
| MAC Address Table | 8K |
| VLAN Support | Up to 4094 VLANs |
| Routing | No Layer 3 routing (L2 only) |
| QoS | SP, WRR, SP+WRR |
| Spanning Tree | STP / RSTP / MSTP |
| Link Aggregation | Supported (LACP) |
| Security Features | 802.1X, ACL, DHCP Snooping, Port Security |
| IGMP Snooping | Supported |
| Jumbo Frame | Supported |
| CPU | 800 MHz |
| Memory | 512 MB SDRAM / 256 MB Flash |
| Surge Protection | 6KV |
| Cooling | Built-in fan |
| Power Input | AC 100–240V, 50/60Hz |
| Power Consumption | ~18W (idle) / ~41W max |
| Dimensions | 440 × 230 × 43.6 mm |
| Weight | ≤ 3.5 kg |
| Operating Temperature | -5°C to 50°C |
| Humidity | 5%–95% (non-condensing) |
| Typical Use Cases | Enterprise access layer, office LAN, CCTV (non-PoE setup), campus networks |
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
