H3C LS-1850V2-10P-HPWR-EI L2 Ethernet Switch (8 x 1GE PoE+ Ethernet Ports & 2 x 1GE SFP Ports) (PoE Budget 125W)
Model H3C LS-1850V2-10P-HPWR-EI-GL
Type Layer 2 Ethernet Switch
Ports 10 Ports (Gigabit Ethernet)
Power over Ethernet (PoE) 10 Ports support Power over Ethernet (PoE)
PoE Standard IEEE 802.3af/at PoE support (delivers power to devices like IP phones, cameras, and wireless access points)
Form Factor Rack-mounted (1U form factor)
Layer Layer 2 (Ethernet Switching)
H3C LS-1850V2-10P-HPWR-EI — Technical Specification
| Category | Specification |
|---|---|
| Model | LS-1850V2-10P-HPWR-EI-GL |
| Series | H3C S1850V2-EI |
| Switch Type | Layer 2 Managed Gigabit PoE+ Switch |
| Ethernet Ports | 8 × 10/100/1000BASE-T |
| Uplink Ports | 2 × 1000BASE-X SFP |
| PoE Standard | IEEE 802.3af / IEEE 802.3at (PoE / PoE+) |
| PoE Type | HPWR (High Power PoE+) |
| Total PoE Budget | 125W |
| Max Power per Port | Up to 30W |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 15 Mpps |
| MAC Address Table | 16K |
| VLAN Support | Up to 4094 VLANs |
| Layer Type | Layer 2 (Access Switch) |
| QoS | SP, WRR, SP+WRR |
| Security Features | 802.1X, ACL, DHCP Snooping, IP Source Guard |
| Management | CLI, Web, SNMP |
| Stacking | Not supported (entry model) |
| CPU | 800 MHz |
| Memory | 256MB Flash / 512MB SDRAM |
| Jumbo Frame | Supported |
| Surge Protection | 6KV |
| Fan Design | Fanless (silent operation) |
| Input Power | AC 100–240V |
| Max Power Consumption | ~150W (with PoE load) |
| Dimensions | 330 × 230 × 43.6 mm |
| Weight | ≤ 3 kg |
| Operating Temperature | -5°C to 50°C |
| Humidity | 5%–95% (non-condensing) |
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.